Product No | NP-1011 |
Model
name | Skiving machine for toe puff of shoes and materials which is hard to skive |
Machinical explanation
①Taper processing machine for edge of rubber and urethane
②Skiving toe puff and counter for hotmelt of shoes
Machinical feature
①Spray function from 3 points around bell knife position is provided.
②Possible to adjust feed speed control.
③Dial for skiving thickness and gauge for skiving angle.
④Upeer feeding function for materials which are thick or difficult to feed.
Specification
machine specification | Taper processing for rubber and urethane |
Max skiving width | 15mm |
Main usage | Skiving for toe puff of shoes and materials which is hard to skive |
Machine size | 380 L (mm) x 535 W (mm) x 395 H (mm) |
Packing size | 680 L (mm) x 680 W (mm) x 430 H (mm) |
Weight | 57 kg |
Remarks | Necessary to arrange a table, stand, and general-purpose mortor(around 200W) and air source for use. |
Example of use
Process of folding hem up – folding hem up after cutting
Skiving the leather thinner to fold hem of cutting part up
It would become easy to fold hem up because of getting thinner the part you want to hem up by skiving process,
also easy to sew and finish product beautifully.
We are only one company for producing leather skiving machine in Japan. We produce not only
main body of machine but also knife in our factory, and carry out thorough quality control.
Not only small lot product but also mass product, we will produce numbers of machines depending on
your frequency of use and any materials, also automatic machines.
The mechanical structure is paid attention to the functional aspect as well as safety and maintenance
for user to easy to use.
ize of NP-202 complete set ; head, table, stand, clutch motor
Net weight | 100kg | Gross weight | 110kg |
Measurement
(Net) | 1200L×530W×1200H(mm) | Measurement
(Gross) | |
*It needs table and driving motor for using skiving machine.
Mechanical specification for skiving machine (standard type)
Max skiving
width | 50mm | Max skiving
degree | 10° |
Max skiving
thickness | 7mm | Recommen-
dation
clutch motor | 200～400W(4P) |
The diameter
for
recommen-
dation
clutch motor | φ50～φ60 | | |
Additional explanation
After setting materials, the material engages into the space between feed roll and presser foot, then it is skived by knife edge. Basically, the necessary size of material is put up above and the wastes go down after skiving. The skiving thickness depends on the height of presser foot, and also the machine is equipped with feed roll with spring for dealing with variation in the thickness of leather or rough materials.
| Machine
specification | Max skiving
width | Main usage |
NP-201 | Leather skiving machine (Patented type) | 50mm | For making shoes and bags |
NP-202 | Leather skiving machine | 50mm | For making shoes and bags |
NP-S1 | Standard skiving machine(for overseas) | 50mm | For making shoes and bags |
NP-10 | Skiving machine for thick leather | 50mm | For hard, thick and rough leather |
NP-1028B | Skiving machine with feed motor | 50mm | For making shoes and bags |
NP-1011 | Taper processing for rubber and urethane | 15mm | Skiving for toe puff of shoes and materials which is hard to skive |
NP-1031 | Computer controlled skiving machine | 20mm | For making shoes and bags |
NP-217 | Skiving machine for Tubular upholstery handles | - | For all kinds of bags |
NP-1010 | Compact skiving machine | 30mm | For all kinds of bags |
Slant skiving set | NP215 | 10mm(standard) | Leather strap, Jointed part of leather |
NP-12 | Attachment of skiving machine | - | - |
NP-13 | Attachment of skiving machine | - | - |
301A 301 | Consumable parts for skiving machine | - | - |
416 Emery wheel | Consumable parts for skiving machine | - | - |
Presser foot | Consumable parts for skiving machine | - | - |
516 feed roller | Consumable parts for skiving machine | - | - |
NP-2051 | Vacuum cleaner for leather skiving machine(Standard) | - | - |
NP-2051K | Vacuum cleaner for leather skiving machine(High powered type) | - | - |
NP-S1G | Standard skiving machine(for overseas) | 50mm | For making shoes and bags |
世界名機 日本地球公司介紹：
日本NIPPY公司
機器品牌：NIPPY地球牌/日比牌
代表總統隆青田
1976年九月成立
註冊資金18000000日元
生產和銷售皮革、鞋子，包包加工要械及聚氨酯橡膠加工機械，配件；
Address 767-1 Shimomiyaki-cho Kasai, Hyogo, Japan 675-2105 5
在1947年3月的第一任總統愛基AOTA成立“NISHIKI米申”在Ideni姬路市，兵庫縣日本。
1953年12月我們開始生產皮革削皮機。
在1960年3月，我們被納入為“日本皮革機械有限公司”的資本公積金為JPY1萬元，80000從私人問題。
在Aipril1961年，我們開始生產帶刀分裂機。
在1962年7月公司總部遷至Nozato北野姬路市，兵庫縣。
在1976年5月英介AOTA假設第二任總統。
1976年9月公司名稱變更為“NIPPYKIKAI有限公司”。
在1977年6月資本金增加至JPY18萬美元。
1978年7月公司總部遷至Shimomiyaki町加西市，兵庫縣。（當前位置）
1984年11月的新倉庫建成。
1989年8月第二工廠建成。
在2012年6月英介AOTA承擔的董事長，和TakashiAOTA承擔的第三任總統。
In March 1947 The first president AIJI AOTA established "NISHIKI MISHIN" at Ideni Himeji city, Hyogo Japan.
In December 1953 We started producing the Leather skiving machine.
In March 1960 We were incorporated as "Japan Leather Machinery Co., LTD. " which the capital fund is JPY1 million and 80 thousand from the private concern.
In Aipril 1961 We started producing the Bandknife splitting machine.
In July 1962 Our head office was moved to Nozato Kitano Himeji city, Hyogo.
In May 1976 EISUKE AOTA assumed the second president.
In September 1976 Our company name was changed to "NIPPY KIKAI CO.,LTD".
In June 1977 The capital fund was increased to JPY18 million.
In July 1978 Our head office was moved to Shimomiyaki-cho Kasai city, Hyogo.(Present location)
In November 1984 The new warehouse was built.
In August 1989 The second factory was built.
NIPPY牌 製鞋機械分以下內個類別
NIPPY牌削皮機
適用皮革、塑膠、橡膠...等的平面及邊緣加工
NIPPY牌帶刀片皮機(帶刀鏟皮機)
適用製鞋、箱包、皮夾...等的縫紉程式之前加工
NIPPY牌切條機(分條機)
適用皮革、塑膠、橡膠...等、可按需要分割之寬度分條加工
NIPPY牌打孔機
根據圖案持續在材料上打孔、適用製鞋、箱包、皮帶...等皮製品
NIPPY牌折邊機
適用製鞋、包、皮帶、皮夾...等，可折真皮、人造皮、塑膠布...等的邊
NIPPY牌上膠機
適用於各種的上膠加工
NIPPY牌皮革烘乾機
用於鞋、包...等的最後收尾工作、能有效的熨平皮革的皺紋，使其平滑
NIPPY牌皮革烘乾機
用於鞋、包...等的最後收尾工作、能有效的熨平皮革的皺紋，使其平滑
使用國家：
Sales network Domestic
We enter into the exclusive dealer contract with distributors of industrial sewing machines and supply our products all of Japan.
中國，韓國，越南，柬埔寨，印尼，印度，孟加拉中東，非洲，歐洲等。
